Laser cutting
Sheet cutting to drawing geometry
- Fiber
- 6 kW / 2,500 × 6,000 mm
- CO₂
- 4 kW / 1,524 × 3,048 mm
PRECISION METAL FABRICATION · BUSAN
Metal fabrication.
To your drawings.
Processes connected.
From laser and waterjet cutting to CNC punching and NC bending.
We coordinate the processes your parts require.
Steel · Stainless steel · Aluminum · Non-ferrous metals
IN-HOUSE EQUIPMENT / TRUMPF FIBER LASER6 kW 2,500 × 6,000 mm
Industrial equipment partsBrackets & coversPlates & punched partsHigh-mix, low-volume & repeat production
COMPANY FILM
Manufacturing expertise,
seen on our shop floor.
Company overview · 2 minutes · Our manufacturing floor
Subtitles: 한국어 · English · 日本語
01 / CAPABILITIES
The right process for
your material and geometry.
Waterjet cutting
Cutting with reduced thermal impact
- Machine
- FLOW Dynamic XD
- Scope
- Straight and bevel cuts, subject to drawing review
CNC punching
Holes, slots and repeated patterns
- Machine
- TRUMPF TruPunch 5000
- Scope
- Punched parts and repeat production
NC bending
Forming angles and three-dimensional shapes
- Scope
- Brackets, covers and sheet-metal parts
- Review
- Material, thickness and bend geometry
Feasibility, tolerances and lead times are confirmed after reviewing the drawings, material, thickness, quantity and production schedule.
Additional fabrication
Selected machining operations and general welding that does not require a welding procedure specification (WPS) are available after review of drawings and quality requirements. Oxy-fuel and plasma cutting are arranged through subcontractors.
02 / QUALITY & TECHNOLOGY
Quality, technology and management
that support our manufacturing.
Our metal fabrication expertise includes EGGCRATE and Tube Support Bar components for nuclear steam generators.
Quality managementISO 9001
Environment & occupational safetyISO 14001 · ISO 45001
Technology developmentDedicated R&D department · Venture Business · INNO-BIZ
Sustainable managementESG management
03 / EQUIPMENT
Equipment behind
our fabrication capabilities.
| Equipment | Manufacturer / model | Main specifications / use |
|---|---|---|
| Fiber laser | TRUMPF | 6 kW · 2,500 × 6,000 mm |
| CO₂ laser | TRUMPF | 4 kW · 1,524 × 3,048 mm |
| Waterjet | FLOW Dynamic XD | 100 HP · 87 kpsi · 2,500 × 7,000 mm |
| CNC punching | TRUMPF TruPunch 5000 | 1,524 × 6,000 mm |
| NC bending | 국도기계 | 6T × 3,100 mm |
| Deburring & edge finishing | WEBER | Removal of residual burrs and edge finishing after cutting or punching |
Machining feasibility is confirmed after reviewing material, thickness, geometry, required tolerances and operating conditions.
04 / PROCESS
From drawing review to shipment.
Requirements checked at each stage.
- 01
Drawing & requirements review
We review material, thickness, quantity, tolerances and inspection requirements to define the fabrication scope.
- 02
Process planning & preparation
We select suitable processes for the geometry and material, then plan the work sequence and production schedule.
- 03
Cutting & punching
We apply laser cutting, waterjet cutting and CNC punching as required by the drawing.
- 04
Deburring & edge finishing
WEBER deburring equipment removes residual burrs and finishes edges for subsequent processing and handling.
- 05
Bending & additional processing
We form angles and three-dimensional shapes. Selected machining operations and general welding are coordinated after drawing and quality review.
- 06
Inspection, packing & shipment
We check parts against the agreed drawings and inspection criteria, then prepare them for packing and shipment.
Processes and their sequence vary by part geometry and quality requirements. General welding is limited to parts that do not require a WPS. Oxy-fuel and plasma cutting are subcontracted.
REQUEST A QUOTE
Start with
your drawing.
Send your drawing, material, thickness, quantity
and requested delivery date.
Submit drawings and enquiries without signing in. Only the administrator can view submitted content and attachments.
77, Hwajeonsandan 2-ro, Gangseo-gu, Busan, Republic of Korea